Welcome to Mustang Books!

My name is Brandon Seyl. I'm a Dad, Author, and Mustang Officer.

I'm an ordinary person who truly believes this world has so much to offer you and I.

My goal with this website is to share my passions in my life. Those passions are serving as a military officer, helping others (people + animals), learning and exploring the radio waves, writing fictional stories, and traveling the world.

Throughout this site I promise, whether apparent or not, my purpose is to "Write a Better World". Whether that lies in the depths of our minds or in the reality of our finger tips.

Happy reading,

Brandon

Diving into Radiowaves: Presenting My Homemade HAM Radio Kit for Beginners

Diving into Radiowaves: Presenting My Homemade HAM Radio Kit for Beginners

Are you interested in amateur radio? Maybe you just earned your license but are unsure which equipment to buy or where to start. 

If this sounds like you, don’t worry. 

I earned my HAM Amateur “Technician” and “General” licenses two months ago. I remember being overwhelmed as I researched what radios to buy, which antennas I needed, and what purpose I wanted my equipment to serve. 

After many conversations with a mentor and hours of research, I finally built my beginner kit. 

This blog post will introduce you to my HAM radio kit. If all goes well, you can order the same gear, or it may inspire your kit. 

A Summary of My Radio Kit: 

A lightweight pelican case with a high-frequency radio, battery, suitable antenna, and carbon fiber mast enables beyond-line-of-sight (voice and data) communications throughout the CONUS and can reach specific OCONUS locations. 

Additionally, I wanted it to serve two purposes: 

(1) Recreational fun (i.e., Parks on the Air (POTA), Summit on the Air (SOTA))
(2) Emergencies (i.e., Hurricanes, disasters, zombies, etc.)

Total Cost: ~$1,270.48 (May be less or more depending on accessories)

Photo of Homemade Beginner Radio Kit by Brandon Seyl

My HAM Radio Kit:

1. Yaesu FT-891 

Photo of Front, Rear, and Top view of the FT-891 radio by Brandon Seyl

The Yaesu FT-891 is an all-mode HF transceiver covering amateur HF bands. This radio provides Single Side Band (SSB), Continuous Wave (CW), Amplitude Modulation (AM), Frequency Modulation (FM), and digital modes of operation.

It has 100 Watts of output power, making it friendly for beginners facing challenging conditions. 

I also enjoy its size. It has an excellent kickstand that fits perfectly on top of my pelican case or a picnic table at a park. 

The large front-facing speaker delivers clear and crisp audio. The FT-891 also comes with a built-in antenna tuner, which means you have to worry or care about one less thing. 

Lastly, the FT-891 is lightweight..weighing just over 4 pounds! 

Cost: $779.95

Link: 

2. Masts:

Okay, here’s where most kits start to vary. Your kit's purpose will drive different antennas and masts. For me, I wanted lightweight and quick set-up/tear-downs. Why? Because I will be hiking throughout parks and mountains to get the best comms possible. 

After researching, I landed on the SOTAbeams Carbon-6 Compact Ultra-Light Telescopic Mast. 

Photo of SOTAbeam Carbon-6 by Brandon Seyl

I 100% recommend buying if you’re interested in POTA/SOTA. 

The mast extends up to 19 ft. and collapses down to 17 inches. It fits in my pelican case, but I typically just throw it in my bookbag as it’s one of the first things I set up. The carbon fiber mast is super-lightweight (less than one lb.) and rapidly deployable using friction locks (pull each section firmly and twist). 

The mast is suitable for supporting lightweight horizontal or inverted-vee antennas. However, I believe it’s perfect for end-fed wire antennas. 

You can set up an end-fed wire antenna in less than five minutes. Now, I’ll show you the antenna I use to meet that timeline. 

Cost: $57.99

Link: 

Sotabeams CARBON-6 SOTAbeams Carbon-6 Compact Ultra-Light Telescopic Masts | DX Engineering

3. Antenna:

I purchased the “100 Watt Linked EFHW 40–10M Portable No Tune Ham Radio Antenna- POTA/Base” on eBay. 

Photo of End-Fed Half Wave Antenna by Brandon Seyl

I chose this antenna because it’s the easiest for beginners to set up. No tuning is required. 

You can elevate the far end of the antenna to its highest point, attach the ground or counterpoise, and then connect the coaxial cable. 

This antenna can be set up as a sloper, Inverted L, or V shape, which is the typical configuration. I have only used it as a sloper, but I can attest that it’s super easy. 

This antenna is very lightweight, easy to erect, and stealthy. While at a park, I had it hidden at the top of a tree as it sloped down near my location. 

As far as radiation pattern, it mostly runs in line with the antenna 

Cost: $119.95

Link: 

100 Watt Linked EFHW 40–10M Portable No Tune Ham Radio Antenna- POTA/Base N9SAB | eBay

4. Power Supply:


Bioenno Power (12V)

I didn't do anything crazy when shopping for a battery. I simply wanted a couple hours of playtime and something allowed in carry-on baggage when I flew. Good news—this battery meets both criteria. Just pack it in your carry-on and let the airline know. 

Do not put it in a checked bag, as TSA could pull it. 

Cost: $79.99

Link: 

Bioenno Power BLF-1206A Bioenno Power BLF-1206A LiFePO4 Batteries | DX Engineering

5. Accessories:

 

Photo of Accessories by Brandon Seyl

5.1 Zip ties 
Cost: $3.99 
Link: 

5.2 Stainless Steel Cable Clamps
Cost: $24.99
Link:

5.3 Ground Stakes
Cost: $6.89
Link:

5.4 Screwdriver
Cost: $14.99
Link:

5.5 550 Cord
Cost: $8.79
Link:

5.6 Connectors

Photo of Connectors by Brandon Seyl
Photo of Pelican Case by Brandon Seyl

5.7 Pelican Case
Cost: $172.95
Link:


Okay, that’s that! I hope you enjoyed this post. Feel free to message me if you have any questions or need assistance. 

Also — stay tuned for future updates, stories of successful contacts, and my radio story. 

Happy Reading. 

Brandon (KQ4UWQ)

 

 

 


Please note that this article may contain affiliate links, which means I may earn a commission if you purchase through those links. This comes at no extra cost and helps support the content creation process.

 

by Brandon Seyl – November 02, 2024

Leave a comment

Please note, comments need to be approved before they are published.